TSM Irrigation and Sprinkler Valve Repair Products

TSM Sprinkler systems repair products for professionals

_______________________________________________________________________

_______________________________________________________________________

FEATURES

Add valves to separate wet and dry areas.

Bypass broken wires.

Divide low pressure lines by adding more valves.
Add new valves to a full controller by using additional programs.
Add drip lines without trenching more wires.
Completely waterproof for direct burial.

FEATURES

Can be installed at any distance from controller.

No disturbing your landscaping.

Compatible with all controllers using self diagnostic circuitry.
Switches before turning on a valve, not after.
No damage from short circuits up to 8 amps.

From the makers of DOUBLER now comes DOUBLER² (aka DOUBLER Squared). DOUBLER² allows independent control of up to four automatic valves with only one valve wire and the common. When DOUBLER² is connected to the station hot wire coming from the controller, it switches when the station is turned on and passes the electrical current to the first valve. The next time the DOUBLER² receives power it switches to the second valve and so on until it has progressed through it's four outputs. Simply connect jumper wires in your controller to the 4 stations you would like to control your valves and set time on each station. If only two stations in your controller are available you may also use another program to run the additional valves. It simply uses the one set of wires up to 4 times. Each valve will water for as long as the time set on the controller.

To bypass a broken wires, connect the DOUBLER² to the nearest operating valve. Run the existing valve and the additional valves on the good wire using a DOUBLER² to separate them.

For sprinkler lines with low pressure, add valves to supply some of the heads and run the valves on a DOUBLER² using the original wire. Also for a sprinkler lines partly in shade and partly in sun or a valves watering both lawn and shrubs.

If you only need to control 2 valves with one wire, please see our product DOUBLER.

See our ads in
Irrigation & Green Industry
&
Landscape Contractor Magazine

________________

____________________________________________________________________________________________

Stations 1,3,5 &7 will be used to control the 4 valves connected to the DOUBLER². Each valve will run according to the time on it's station. It simply uses the same valve hot wire 4 times. Easy to install and completely waterproof. Your irrigation system repair couldn't be easier with DOUBLER²!!

____________________________________________________________________________________________

CLICK HERE TO FIND A DISTRIBUTOR IN YOUR AREA

____________________________________________________________________________________________

FOR MORE INFORMATION

Download and print out these PDF's for more information

Click Here

DOUBLER²
Promotional Sheet

Print this out and take it with you to your distributor to ensure you get exactly what you are looking for.

Click Here

DOUBLER² Installation Instructions

Have yours gone missing? Want to see how easy it is to install for yourself? Download a copy for your very own!

The above documents require Adobe Acrobat Reader.
Click the icon for the latest version.

____________________________________________________________________________________________

ONE YEAR LIMITED WARRANTY

TRANSITIONAL SYSTEMS MANUFACTURING COMPANY, hereinafter referred to as the manufacturer, warrants its products including, but not limited to, those manufactured to specifications supplied to it, for a period of one year from the date of delivery to (a) distributor’s vendee, or (b) purchaser other than distributor buying directly from manufacturer, to be free from defects in workmanship and materials. Any defect appearing more than one year from the date of delivery to purchaser shall be deemed to be due to ordinary wear and tear. Manufacturer, however, assumes no risk or liability for results of the use of the products purchased from it, including but without limiting the generality of the foregoing: (1) the use in combination with any electrical or electronic components, circuits, systems, assemblies or any other materials or substances; (2) unsuitability of any product for use in any circuit or assembly or environment. Purchaser’s rights under this warranty shall consist solely of requiring manufacturer to repair, or in manufacturer’s sole discretion replace, free of charge, F.O.B. factory, any defective items received at said factory within said year and determined by manufacturer to be defective. The giving of or failure to give any advice or recommendation by manufacturer shall not constitute liability of the manufacturer, AND IS IN LIEU OF ANY AND ALL OTHER WARRANTIES EXPRESSED, IMPLIED, OR STATUTORY AS TO MERCHANTABILITY, FITNESS FOR PURPOSE SOLD, DESCRIPTION, QUALITY, PRODUCTIVENESS, OR ANY OTHER MATTER. In no event shall manufacturer be liable for special or consequential damages or for delay in performance of this warranty. Some states do not allow the limitation or exclusion of incidental or consequential damages and some states do not allow limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.

BROKEN LINKS OR MISSING INFO?

Please let us know if you find any broken links or missing information on this website by CONTACTING US via this link.
Also, let us know if you would like to see anything on the site that we may have overlooked. We want this site to be useful as well as easy to navigate.

contact us

Have a question? Need some advice on which is the right product for your Irrigation repair needs? Please contact us.

Telephone: (530) 751-2610
Fax: (530) 751-2512
or CLICK HERE to send us an email.

what we do

For over 25 years we have been producing easy to use, quality solutions to help you repair those tricky problems found in most sprinkler irrigation systems and get your system back up and running fast.