For more documentation on PiggyBack click here

Universal 4-Station Module

PiggyBack is a hybrid 4-station timer used to increase the capacity of an existing controller.  You can upgrade an 8-station clock to a 12, or a 12 to a 16, etc. PiggyBack is especially useful when adding more valves with DOUBLER or DOUBLER²  where all the stations in your existing controller are already in use.  Adding another controller just complicates your life every time the weather changes.  PiggyBack turns on after the controller completes it's cycle so there are no start times or programs to set.

A trigger wire connects PiggyBack to a station on the controller.  when that station turns on, PiggyBack is alerted through the trigger wire and when it shuts off, PiggyBack begins watering.  PiggyBack always follows the station it is connected to.  You can add stations to a lawn program by connecting by connecting the trigger wire to the last lawn station or add to a shrub program by connecting a PiggyBack to the last shrub station.  You can even do both!  To shorten total watering time PiggyBack's trigger wire can be connected to the first station to water drip systems while the controller operates the sprinklers.  To add more than 4 stations on the same program connect the trigger wire of a second PiggyBack to the last station of the first PiggyBack module.

Each station of the PiggyBack has time settings of one minute to 4 hours.  A manual Start/Advance button makes testing and flushing sprinklers easier.  PiggyBack can be used without a controller by connecting to a 24VAC transformer.  With a 2 Amp fuse and optically isolated outputs on each station, PiggyBack is one of the most reliable parts of any sprinkler system.

For more information on PiggyBack please click Here.

TO FIND A DISTRIBUTOR IN YOUR AREA, PLEASE CLICK HERE

TRANSITIONAL SYSTEMS MANUFACTURING COMPANY, hereinafter referred to as the manufacturer, warrants its products including, but not limited to, those manufactured to specifications supplied to it, for a period of one year from the date of delivery to (a) distributor’s vendee, or (b) purchaser other than distributor buying directly from manufacturer, to be free from defects in workmanship and materials. Any defect appearing more than one year from the date of delivery to purchaser shall be deemed to be due to ordinary wear and tear. Manufacturer, however, assumes no risk or liability for results of the use of the products purchased from it, including but without limiting the generality of the foregoing: (1) the use in combination with any electrical or electronic components, circuits, systems, assemblies or any other materials or substances; (2) unsuitability of any product for use in any circuit or assembly or environment. Purchaser’s rights under this warranty shall consist solely of requiring manufacturer to repair, or in manufacturer’s sole discretion replace, free of charge, F.O.B. factory, any defective items received at said factory within said year and determined by manufacturer to be defective. The giving of or failure to give any advice or recommendation by manufacturer shall not constitute liability of the manufacturer, AND IS IN LIEU OF ANY AND ALL OTHER WARRANTIES EXPRESSED, IMPLIED, OR STATUTORY AS TO MERCHANTABILITY, FITNESS FOR PURPOSE SOLD, DESCRIPTION, QUALITY, PRODUCTIVENESS, OR ANY OTHER MATTER. In no event shall manufacturer be liable for special or consequential damages or for delay in performance of this warranty. Some states do not allow the limitation or exclusion of incidental or consequential damages and some states do not allow limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.

[ Home ] [ Irrigation Products ] [ Irrigation Distributors ] [ Contact Us ] [ Irrigation Links ]